10 Meters (32.8Ft) 5050 SMD LED Strips, designed by LEDemain professional LED team. Higher quality and brightness than 3528 SMD!
EXPENSIVE MATERIALS - We go above and beyond when it comes to material selection. We insist on using double layer copper, updated adhesive tape, and the whole set comes with 4 clips for free. Power adapter use the best quality of fuse,is highly-resistant to short circuits,more safe.
EASY INSTALLATION - The led strip full kit includes all essential parts for installation, you have no need for other accessories unless you want to do DIY work. This led strips can be cut between every 3 leds if you want to do DIY work.
With these LED Novelty lighting you can Lighting up your Party such as Weddings, Birthday Party, School Party, Dancing Party etc
Length 10M (2*5M); total LED:300; IP65 rated; 6A Power Adatper; LED lifespan is over 50000 hrs.
COMPATIBLE WITH: Both Waterproof and Non-Waterproof SMD5050 RGB LED strip lights. Not for SMD3528 RGB LED strip lights.
FUNCTIONS: Connect between two 5050 LED strip sections to bypass/bend around a corner, curve, angle or gap, making connection natural and beautiful.
EASY INSTALLATION: No need to solder. Just clasp your prepared led strip section into the connector to get connected.
FLEXIBLE & DURABLE: Each cable consists of 4 individaul wires. With 17pcs of tin-plated pure copper threads stranded inside each individual wire, these cables are flexible and durable enough to bend or twist in ANY ANGLES without breaking. Pure copper wires electroplated with tin can prevent oxidation, which ensures flexibility, durability, perfect electric conductivity and a longer service life.
FROM LitaElek: Package Comes with Unique Amazon Barcode. 10pcs inside.
Three Kinds of Main LED Strip Connectors: One Connector Cable is to link two strip lights, or to connect several light segments together, and seamlessly extend led strips as you desire; the Female Connector Cable is to connect light strips and remote controllers, with 4-pin 10mm/ 0.4inch Male Connectors to insert into the female connector cable
Application: All of the 3 connectors are 10mm/ 0.4inch wide, compatible with SMD5050 RGB led strip lights, not for SMD 3528.
Easy Insert and Extract to Use: Simple, tool-free installation and avoid soldering. Cut the strip light along the cutting line, splice the ribbon electrically with this jumper. If you have a waterproof SMD5050 LED strip, you should peel off silicon on the surface around soldering line area and then insert the strip light into the connector body and until the connector grab the ribbon
Features: Our connector cables are fully bendable and are perfect for extending a run of LED light strip across a gap, around an obstacle, or for making a bend. You can bend the wires 90 degrees (or whatever angle you require,) and keep going with the LED strip
Package Includes: 5 x SurLight SMD5050 RGB led strip light connector cables; 5 x Female Connetor Cables; 5 x 4-pin Male Connectors; 30 Days Money Back Guarantee and 90 Days Warranty; 100% High-Quality & Friendly Service and 24-hours Email Response; if you have any problem, please email us freely
High-quality LED STRIP LIGHT: Non-waterproof 512V DC Super bright NO-Waterproof RGB 5050 SMD LED strip Brighter Than 3528 LED Strip.With the DC connector cable, you can connect directly the strip light and power supply. The lights are perfect for indoor use. NOTE:The stickiness of the glass is the strongest, and the other places may be slightly weaker, and it is necessary to ensure that the paste is completely flat without dust
Strong Adhesive, Easy Installation, Widely Use: Led strip light roll can be cut between every 3 LEDs with the included accessories, without damaging the rest strips according to your requirement. The strong 3M self-adhesive tape is adopted and can be fit on any dry and flat surface.
This light strip is suitable for home decoration, cabinet, closet, kitchen, girls bedroom, patio, garden, hotel, club, KTV, shopping mall, bar, shop, restaurant, casino and business lighting decoration.
Flexible, Cuttable and Linkable Light Strip: With a DC Jack Connector on one end and 2 wires on the other end, you can directly plug the power supply into the DC connector.
The led strip kit includes all the essential parts for installation, you have no need for another accessories if you don't cut the strip light. if you have any problem, please email to us.